Work With Primers

Priming the ceiling - the choice of material and technique of application

When painting the ceiling, it must be properly primed. This will maximize the quality of adhesion of used materials, which, in turn, will significantly improve the strength and reliability of the coating. In any case, the priming of the ceiling before painting is an indispensable procedure, which must be performed in strict sequence.

Contents:
  • Surface preparation
  • Recommended materials
  • Additional tools
  • Why to primer
  • Basic stages
  • Drying times

Surface preparation

Before proceeding with the priming process, it must be prepared properly. For this purpose, a number of works should be performed:

  • at the initial stage completely remove all layers of the previous coating;
  • then carefully clean the ceiling base;
  • after that start embedding the existing base defects, whether it is volume cavities, cracks or bulges;
  • perform the preliminary priming;
  • then apply an initial layer of test plaster;
  • then apply a layer of high-quality finish putty on the surface of the ceiling;
  • instagram story viewer
  • is the next important step before the final primer - careful processing of the ceiling with a special skin and carrying out trowelling.

Keep in mind that before you start the final priming of the ceiling and walls before painting, you must definitely get rid of all debris. This is necessary to avoid excessive dust, which can spoil the result obtained after your work.

Recommended materials

Consider how to primetovat ceiling according to all the rules, and what materials can be used for this purpose.

Currently, in the construction of shopping malls and supermarkets a wide selection of primers for walls and ceilings is available - they are available in the form of finished primer mixtures or concentrate, which must be properly diluted with water in the proportions specified in the instructions. If it is necessary to prime the impressive areas of ceilings and walls, it is advisable to purchase special concentrates in large volumes - so you will feel real savings.

All those who plan to primed the ceiling before coating with water-based or other types of paint, are interested in how many hours the primer dries, and in what proportions it is properly diluted. The total drying time of the primer depends on the type of surface coating. The type of surface coating influences the calculation of proportions when diluting the primer mix, however, in most cases it is recommended to adhere to the proportions 1: 5 or 1: 2.

Additional tools

It is important not only to purchase a high-quality primer for the ceiling and walls, but also to properly select all the necessary tools and auxiliary materials.

For priming under a special tile or under a coating of water-based paint, you need to use a comfortable roller or brush. It is important that these products are of high quality, because this affects the longevity of the coating and the reliability of the work performed. In most cases, it is preferable to use a roller for priming, since it makes it possible to cope with this work much better, easier and faster.

Brushes with too stiff bristles should not be used for priming ceilings and walls, as they can leave unattractive streaks and traces on surfaces.

But if you plan to glue wallpaper in the future, a hard brush is exactly what you need. It will allow creating surface roughness on the surface, due to which the quality of the adhesion of the putty with the adhesive composition and with the wallpaper itself will significantly improve.

For what it is necessary to primed

. When painting a special ceiling tile, the ceiling must necessarily be primed. There are several important reasons for this procedure.

  1. Priming the ceiling and walls can significantly reduce paint consumption, and also prevents the appearance of unsightly spots.

    Consequences of the uncoated ceiling

  2. Primer provides the best quality adhesion of the ceiling surface with its finish tiles.
  3. Finishing of the ceiling - paint or tiles - thanks to the use of a primer it will be much more durable, reliable and durable.
  4. Pre-priming of the ceiling and walls contributes to the fact that the paint coating used will become less susceptible to negative destructive effects of moisture.

Based on all of the above, you can safely say that the priming of the ceiling with their own hands under the tiles, painting or wallpaper is absolutely necessary - this is by no means a luxury, but an important necessity.

Basic stages of

The priming process does not present any complexity, as it has much in common with the process of painting walls or ceilings. However, in this case, other materials are used.

  • diluted in the correct proportions of the primer mixture is placed in a convenient bath;
  • special roller or brush( depending on your preferences) you need to gently dip into the bath;
  • the excess of the primer solution must be carefully shaken off;
  • then smoothly roll the primer evenly over the entire surface of the ceiling in a single layer.

When covering walls and ceilings for the future paint coating or under the tile, several important points should be considered. This solution should be distributed on the ceiling surface as evenly as possible, without losing sight of any area.

If the ceiling design is multi-level and contains different cornices and ledges, it is necessary to give them special attention. Also keep in mind that only after the layer of primer is thoroughly dry, it will be possible to further process the walls and ceiling - applying water-based paint or tiles.

Drying times

To do everything correctly, it is important to know how much the primer layer dries. Typically, this depends on the type of surface, as well as the consistency and composition of the solution used.

Primer for deep penetration for the ceiling can dry for an average of six to twelve hours. In order to accelerate drying, special heat guns are sometimes used.

People planning to repair the ceiling and walls with their own hands, are interested in how many hours the primer mixture dries on a variety of surfaces. A high-quality primer, applied with a roller on the usual cement-sand plaster or putty, dries on average about two to three hours. However, for this it is necessary that the air temperature is between 25 and 30 degrees Celsius.

Knowing how long the primer for the ceiling should dry, you will be able to plan all subsequent work correctly. If after applying the primer mix with a roller, it is planned to treat the surface with a starting putty, there is no need to wait for complete drying.

Also many people are wondering how much the primer mixture dries on the surface, covered with putty or plaster on the basis of cement and lime. In this case, the process of complete drying can last from four to six hours - depending on the number of layers. After the surface is completely dry, you can start laying tiles or painting.

Now that you have a complete idea of ​​how much the primer for the ceiling dries with the roller on different types of surfaces, you will be able to properly repair yourself. Do not doubt - the result will be attractive and durable!

Instagram viewer